High-precision measurements of seawater Pb isotope compositions by double spike thermal ionization mass spectrometry

A new method for the determination of seawater Pb isotope compositions and concentrations was developed, which combines and optimizes previously published protocols for the separation and isotopic analysis of this element. For isotopic analysis, the procedure involves initial separation of Pb from 1 to 2 L of seawater by co-precipitation with Mg hydroxide and further purification by a two stage anion exchange procedure. The Pb isotope measurements are subsequently carried out by thermal ionization mass spectrometry using a ²⁰⁷Pb–²⁰⁴Pb double spike for correction of instrumental mass fractionation. These methods are associated with a total procedural Pb blank of 28 ± 21 pg (1sd) and typical Pb recoveries of 40–60%. The Pb concentrations are determined by isotope dilution (ID) on 50 mL of seawater, using a simplified version of above methods. Analyses of multiple aliquots of six seawater samples yield a reproducibility of about ±1 to ±10% (1sd) for Pb concentrations of between 7 and 50 pmol/kg, where precision was primarily limited by the uncertainty of the blank correction (12 ± 4 pg; 1sd). For the Pb isotope analyses, typical reproducibilities (±2sd) of 700–1500 ppm and 1000–2000 ppm were achieved for ²⁰⁷Pb/²⁰⁶Pb, ²⁰⁸Pb/²⁰⁶Pb and ²⁰⁶Pb/²⁰⁴Pb, ²⁰⁷Pb/²⁰⁴Pb, ²⁰⁸Pb/²⁰⁴Pb, respectively. These results are superior to literature data that were obtained using plasma source mass spectrometry and they are at least a factor of five more precise for ratios involving the minor ²⁰⁴Pb isotope. Both Pb concentration and isotope data, furthermore, show good agreement with published results for two seawater intercomparison samples of the GEOTRACES program. Finally, the new methods were applied to a seawater depth profile from the eastern South Atlantic. Both Pb contents and isotope compositions display a smooth evolution with depth, and no obvious outliers. Compared to previous Pb isotope data for seawater, the ²⁰⁶Pb/²⁰⁴Pb ratios are well correlated with ²⁰⁷Pb/²⁰⁶Pb, underlining the significant improvement achieved in the measurement of the minor ²⁰⁴Pb isotope.     

An open source ion gate pulser for ion mobility spectrometry

Excluding the ion source, an ion mobility spectrometer is fundamentally comprised of drift chamber, ion gate, pulsing electronics, and a mechanism for amplifying and recording ion signals. Historically, the solutions to each of these challenges have been custom and rarely replicated exactly. For the IMS research community few detailed resources exist that explicitly detail the construction and operation of ion mobility systems. In an effort to address this knowledge gap we outline a solution to one of the key aspects of a drift tube ion mobility system, the ion gate pulser. Bradbury-Nielsen or Tyndall ion gates are found in nearly every research-grade and commercial IMS system. While conceptually simple, these gate structures often require custom, high-voltage, floating electronics. In this report we detail the operation and performance characteristics of a wifi-enabled, MOSFET-based pulser design that uses a lithium-polymer battery and does not require high voltage isolation transformers. Currently, each output of this circuit follows a TTL signal with ~20 ns rise and fall times, pulses up to +/? 200 V, and is entirely isolated using fiber optics. Detailed schematics and source code are provided to enable continued use of robust pulsing electronics that ease experimental efforts for future comparison.     

Improving simulated annealing through derandomization

We propose and study a version of simulated annealing (SA) on continuous state spaces based on \((t,s)_R\)-sequences. The parameter \(R\in \bar{\mathbb {N}}\) regulates the degree of randomness of the input sequence, with the case \(R=0\) corresponding to IID uniform random numbers and the limiting case \(R=\infty \) to (t, s)-sequences. Our main result, obtained for rectangular domains, shows that the resulting optimization method, which we refer to as QMC-SA, converges almost surely to the global optimum of the objective function \(\varphi \) for any \(R\in \mathbb {N}\). When \(\varphi \) is univariate, we are in addition able to show that the completely deterministic version of QMC-SA is convergent. A key property of these results is that they do not require objective-dependent conditions on the cooling schedule. As a corollary of our theoretical analysis, we provide a new almost sure convergence result for SA which shares this property under minimal assumptions on \(\varphi \). We further explain how our results in fact apply to a broader class of optimization methods including for example threshold accepting, for which to our knowledge no convergence results currently exist. We finally illustrate the superiority of QMC-SA over SA algorithms in a numerical study.     

On the Role of Exponential Smoothing in Circadian Dosimetry

The effects lighting has on health through modulation of circadian rhythms are becoming increasingly well documented. Data are still needed to show how light exposures are influenced by architecture and lighting design and circadian dosimetry analyses should provide duration, phase and amplitude measures of 24 h exposure profiles. Exponential smoothing is used to derive suitable metrics from 24 h light measurements collected from private dwellings. A further application of these modified exposure time series as physiological models of the light drive is discussed. Unlike previous light drive models, the dose rate persists into periods of darkness following exposures. Comparisons to long duration exposure studies suggest this type of persistent light drive model could be incorporated into contemporary physiological models of the human circadian oscillator.     

Thermal expansion in 3d-metal Prussian Blue Analogs—A survey study

We present a comprehensive study of the structural properties and the thermal expansion behavior of 17 different Prussian Blue Analogs (PBAs) with compositions M^II₃[(M′)^III(CN)₆]₂·nH₂O and M^II₂[Fe^II(CN)₆]·nH₂O, where M^II=Mn, Fe, Co, Ni, Cu and Zn, (M′)^III=Co, Fe and n is the number of water molecules, which range from 5 to 18 for these compounds. The PBAs were synthesized via standard chemical precipitation methods, and temperature-dependent X-ray diffraction studies were performed in the temperature range between −150 °C (123 K) and room-temperature. The vast majority of the studied PBAs were found to crystallize in cubic structures of space groups Fm3?m, F4?3m and Pm3?m. The temperature dependence of the lattice parameters was taken to compute an average coefficient of linear thermal expansion in the studied temperature range. Of the 17 compounds, 9 display negative values for the average coefficient of linear thermal expansion, which can be as large as 39.7×¹0⁻⁶ K⁻¹ for Co₃[Co(CN)₆]₂·12H₂O. All of the M^II₃[Co^III(CN)₆]₂·nH₂O compounds show negative thermal expansion behavior, which correlates with the Irving–Williams series for metal complex stability. The thermal expansion behavior for the PBAs of the M^II₃[Fe^III(CN)₆]₂·nH₂O family are found to switch between positive (for M=Mn, Co, Ni) and negative (M=Cu, Zn) behavior, depending on the choice of the metal cation (M). On the other hand, all of the M^II₂[Fe^II(CN)₆]·nH₂O compounds show positive thermal expansion behavior.     

Hydride mobility in trinuclear sulfido clusters with the core [Rh3(μ-H)(μ3-S)2]: molecular models for hydrogen migration on metal sulfide hydrotreating catalysts

The treatment of [{Rh(μ-SH){P(OPh)(3)}(2)}(2)] with [{M(μ-Cl)(diolef)}(2)] (diolef=diolefin) in the presence of NEt(3) affords the hydrido-sulfido clusters [Rh(3)(μ-H)(μ(3)-S)(2)(diolef){P(OPh)(3)}(4)] (diolef=1,5-cyclooctadiene (cod) for 1, 2,5-norbornadiene (nbd) for 2, and tetrafluorobenzo[5,6]bicyclo[2.2.2]octa-2,5,7-triene (tfb) for 3) and [Rh(2)Ir(μ-H)(μ(3)-S)(2)(cod){P(OPh)(3)}(4)] (4). Cluster 1 can be also obtained by treating [{Rh(μ-SH){P(OPh)(3)}(2)}(2)] with [{Rh(μ-OMe)(cod)}(2)], although the main product of the reaction with [{Ir(μ-OMe)(cod)}(2)] was [RhIr(2)(μ-H)(μ(3)-S)(2)(cod)(2){P(OPh)(3)}(2)] (5). The molecular structures of clusters 1 and 4 have been determined by X-ray diffraction methods. The deprotonation of a hydrosulfido ligand in [{Rh(μ-SH)(CO)(PPh(3))}(2)] by [M(acac)(diolef)] (acac=acetylacetonate) results in the formation of hydrido-sulfido clusters [Rh(3)(μ-H)(μ(3)-S)(2)(CO)(2) (diolef)(PPh(3))(2)] (diolef=cod for 6, nbd for 7) and [Rh(2)Ir(μ-H)(μ(3)-S)(2)(CO)(2)(cod)(PPh(3))(2)] (8). Clusters 1-3 and 5 exist in solution as two interconverting isomers with the bridging hydride ligand at different edges. Cluster 8 exists as three isomers that arise from the disposition of the PPh(3) ligands in the cluster (cis and trans) and the location of the hydride ligand. The dynamic behaviour of clusters with bulky triphenylphosphite ligands, which involves hydrogen migration from rhodium to sulfur with a switch from hydride to proton character, is significant to understand hydrogen diffusion on the surface of metal sulfide hydrotreating catalysts.     

Fragmentations observed in the reactions of α-methoxy-γ-alkoxyalkyl iodide substrates with super-electron-donors derived from 4-DMAP and N-methylbenzimidazole

Reactions of super-electron-donors (SEDs) derived from 4-dimethylaminopyridine and from N-methylbenzimidazole with α-methoxy-γ-alkoxyalkyl iodides lead to liberation of the γ-alkoxy groups as their alcohols. This is consistent with generation of alkyl radicals from the alkyl halide precursors, and trapping of these radicals by the radical-cation of the SED, followed by a heterolytic fragmentation.     

Allene functionalization via bicyclic methylene aziridines

The oxidative functionalization of olefins is a common method for the formation of vicinal carbon-heteroatom bonds. However, oxidative methods to transform allenes into synthetic motifs containing three contiguous carbon-heteroatom bonds are much less developed. This paper describes the use of bicyclic methylene aziridines (MAs), prepared via intramolecular allene aziridination, as scaffolds for functionalization of all three allene carbons.     

Diaxial diureido decalins as compact, efficient, and tunable anion transporters

Decalins bearing two axial -NHCONHAr substituents and an ester-linked alkyl side chain have been synthesized and studied as anion receptors and transporters. The design relates to steroid-based "cholapods" but is more compact and less intrinsically lipophilic. Transport rates depend on both NHAr and the alkyl side chain. High activities can be achieved; with optimal substitution, chloride-nitrate exchange across vesicle membranes is measurable at transporter/lipid ratios as low as 1:250,000.